Solarmodul-Verzeichnis
(12.490 Modulserien / 46.608 Module)

• Bifacial technology enables additional energy harvesting

• 30 years lifespan brings 10-30% additional power generation

• The N-type solar cell has no LID

• Excellent low irradiance performance

• Better light trapping

• Industry-leading lowest thermal co-efficient

• 10-30% Additional Power Generation

• ZERO LID (Light Induced Degradation)

• Higher Reliability

• Better Weak Illumination Response

• Better Temperature Coefficient

• Incorporates SMBB Technology with Half-Cut Topcon Cells

• Utilizes HOT 2,0 Technology for Improved Performance

• Demonstrates Outstanding Low-Light Performance

• Enhances Mechanical Load Tolerance

• Exhibits Resistance to PID

• 144 half-cut solar cells

• Advanced half-cut design

• Up to 465 watts output

• Excellent conversion efficiency of up to 20,4%

• 0 to 3% positive power sorting

• Anti-PID technology

• 12-year product warranty

• 25-year linear performance warranty

• Utilize Bifacial Technology for Additional Energy Harvesting from the Rear Side

• Demonstrates Excellent PID Resistance

• Boasts an Industry-Leading Low Thermal Power Coefficient

• Module Imp Binning Significantly Reduces String Mismatch Losses

● Eines der innovativsten Solarunternehmen

● F&E von USA-Team

● 5BB/9BB/12BB Solarzellen, weniger Stromverluste

● 1.500 V System, niedrige BOS-Kosten

● Top Leistung bei wenig Licht

● Leistungsabgabe mit höherer Effizienz

● Stabil & sicher bei Wind & Schnee

● Salz- & Ammoniakbeständig

● 25 Jahre Garantie

• Outstanding Efficiency

• Reduced Heat Spot Risk

• Exceptional Low-Light Performance

• 0-3% Power Tolerance Range

• Highly Resistant to PID

• Withstands Harsh Weather Conditions

• Bifacial Power Gain

• 20,5% Peak Efficiency

• Durable Double Glass Design

• 72 Monocrystalline Cells

• 12% Transparency

• Certified for Overhead Mounting

• IP 68 Rated Junction Box

• Innovational Shingled Technology

• Improved Efficiency

• Up to 35% Better Shade Performance

• Cost-effective, Save 10~13% BOS Cost and 12% Transportation Cost

• 15-Year Product, 25-Year Linear Performance Warranty

• Stock in EU (15~30 MW monthly shipment to Rotterdam warehouse), DDP Service in EU

• Cutting-edge N-Type TOPCon Cells for High Efficiency

• Reaching an Impressive Peak Efficiency of 22,45%

• Harness Bifacial Power Gain for Enhanced Performance

• Ample Power Output for Optimal Energy Harvesting

• Lightweight Design Ensures Effortless Installation

• Junction Box with IP68 Protection

• Optimal Choice for Ultra-large Power Plants

• ZERO LID

• PID Resistance

• Durability Against Extreme Environmental Conditions

• More Outstanding Low-Light Performance

• Enhanced Mechanical Load

• EL Full Inspection

• Zero LID

• Anti-PID

• Resistant to harsh environments

• Lower temperature coefficient(-0,29%/℃)

• Excellent low irradiance performance

• 80%-85% bifaciality and up to 30% power gain from the back side

• Lower BOS and LCOE

• Rigorous quality control meeting the highest international standards

• High-transmittance low-iron tempered glass, strong aluminium frame using UV-resistant silicon

• ISO 9.001:2.008, ISO 14.001:2.004, OHSAS 18.001

• IEC 61.215, IEC 61.730, safety class II, conformity to CE

• Elegant Full Black Design

• Proven Half-Cut PERC Cells

• Advanced Multi-Wire Technology

• Up To 20,7% Peak Efficiency

• PID Resistant

• 25-Year Linear Power Output Warranty At 84,8%

• 12-Year Materials And Workmanship Warranty

- EVA encapsulated

- Glass foil sandwich laminated

- Sandblasted anodizing Aluminum frame

- IEC 5.400Pa tested

- Hail up to 25mm diameter, 80 Km/h tested

- Temperature Range: -40 to +85 ℃

- Nominal operating cell temperature (NOCT): 47℃

• Durable Dual Glass Design

• Mono PERC Cells with Half-cut Technology

• Higher Power Output

• PID Resistant,

• High Efficiency up to 21,1%

• 0~+5W Positive Power Tolerance

• 12 Years Materials 25 Years Linear Output Warranty

1. High-efficiency PERC cell, half-cut technology;

2. Positive power tolerance up to +5W;

3. 30 years warranty for minimum 83% power output;

4. TUV, CE, INMETRO, ISO, PV Cycle certified;

5. 5.400 Pa mechanical strength;

6. Available in both white and black colors.

• Ideal for large-scale installations

• One of the industry's most trusted modules

• Highly reliable due to stringent quality control

• Certified to withstand challenging environmental conditions

• World's No.1 Brand

• Advanced Technology

• M-10 Galium Doped Wafer

• Integrated Segmented Ribbons

• 9BB Half-cut Cells.

• Excellent Power Generation Performance

• High-Quality Modules Ensure Long-Term Performance

• 12-Year Product, 25-Year Linear Power Warranty

• HJT 2,0 Technology

• -0,26%/°C Pmax temperature coefficient

• SMBB design with Half-Cut Technology

• Up to 90% Bifaciality

• Sealing with PIB-based sealant

• Quality Management System and Product Certification