Nantong A-REOO Technology Co., Ltd.
Chengnan Industrial Park, Rudong, Nantong, Jiangsu, 226400
China China

Mitarbeiter Informationen

Personalbestand: 480
Unternehmen Beschreibung

REOO Technology Co., Ltd. wurde 2005 gegründet und ist auf die Konstruktion, Erforschung, Entwicklung und Herstellung von Maschinen zur Herstellung von Solarmodulen spezialisiert, die auf einer schlüsselfertigen Lösung und einem One-Stop-Modell basieren. Wir bieten Layout-Design, Standortinstallation, Schulung und langfristigen Kundendienst. Unsere Produktionslinie kann PERC-, TOPCon-, BC-, HJT-Zellen-Solarmodule, leichte Solarmodule und BIPV-Module produzieren. Die Jahresleistung der Produktionslinie liegt zwischen 5 MW und 1 GW. Wir stellen hauptsächlich Geräte wie Laminatoren, Zellschneidemaschinen, Folienschneidemaschinen, Stringer, Layoutmaschinen, Tabbing- und Stringing-Maschinen, EL-Tester, IV-Tester, Rahmenmaschinen, Montageförderer und andere her.

Der Hauptsitz des Unternehmens befindet sich in Nantong, Jiangsu, etwa 1,5 Autostunden oder mit dem Schnellzug vom Flughafen Shanghai Hongqiao entfernt. Das Unternehmen verfügt über zwei Produktionsstandorte, einen für Laminatoren und einen für Zusatzgeräte, sowie über Forschungs- und Entwicklungs- und Geschäftszentren.

Auf 28.000 Quadratmetern eigenem Grundstück verfügt das Unternehmen über standardisierte Werkstätten und Bürogebäude, darunter Abteilungen für Forschung und Entwicklung, Produktion, Marketing, Verwaltung, Finanzen und Kundendienst.

Aufgrund unseres Fokus auf hohe Automatisierung, niedrige Kosten, maßgeschneiderte Funktionalität und zeitnahen Kundendienst für Produktionslinien für Solarmodule wurden unsere Geräte in über 80 Länder weltweit in die USA, Kanada, Europa, Südamerika, Australien und Korea exportiert , Südost- und Zentralasien, Afrika, und es erhielt großes Lob von unseren Kunden.

Unternehmensdetails
Art der Ausrüstung
Ausrüstung zur Solarzellen-Herstellung: Sortierer der Zellen, Zelltester, Prüfer für Eindruck der Zelle
Ausrüstung zur kristallinen Modul-Herstellung: Schlüsselfertige Produktionslinien für Module, Solarsimulator, Lötmaterial, Stringer, Lötautomat, Laminator, Aushärtung Ofen, Laser Zellen Schneider / Strukturierer, Rahmungsstation, Fertigungslinien, Handlingsystem für Module, Automatisiert Fertigungsstraße, Fördereinheiten, Lay-up Station, EL Tester, Andere
Produktvideos
Solar Panel Production Line
Produkte

REOO —— Foucs on Customized Solar Panel Production Line, Lower Cost, Automatic

Products

500MW Full Automatic Solar Panel Production Line

Automatic Level — 95%

Module Type — Compatible Glass-Backsheet module, Glass-Glass module

Max Size of Solar Module — 1600x992 mm - 2340*1303*35mm  

Solar Cell — PERC, TOPCon, BC and HJT

Busbar — 5BB - 20BB      

Production Speed — 3360 pcs solar panel per 8 hours

Daily Working Hours — 20 hours      

Production Space — ˃ 6000 m2

Operators Per Shift — ˃= 12

Power supply Requirement — 380V- 400V, 3 phase 5 wires, or customized

Power Consumption — Max 800KW

Air Supply Requirement — Compressed air 0.5 - 0.7 MPa. 800 L / min

Water — Do not need

Temperature — 25 ℃

Humidity — 50 % - 70 %

30MW Solar Panel Production Line

Automatic Level — 80%        

Module Type — Compatible Glass-Backsheet module, Glass-Glass module

Max Size of Solar Module — 300x300 mm - 2204*1303*35mm

Solar Cell — PERC, Topcan, BC and HJT

Busbar — 5BB - 20BB    

Production Speed — 72 pcs solar panel per 8 hours (600W panel)

Daily Working Hours — 20 hours      

Facility Condition Production Space — ˃ 1000 m2

Operators Per Shift — ˃= 6

Power Supply Requirement — 380V-400V, 3 phase 5 wires, or customized

Power Consumption — Max 100KW

Air Supply Requirement — Compressed air 0.5 - 0.7 MPa. 200 L / min

Water — Do not need

Temperature — 25 ℃

Humidity — 50 % - 70 %

Light Weight Solar Module Production Line

Composition of the final assembly production line (see equipment list for details)

Tabbing and String Machine — Connect the solar cells according to process requirements

Glass Kit Board Loading — Automatically load glass and remove paper/ kit boards for lightweight modules

Conveying/Conveying Alignment — Module conveying and its position alignment

Cutting Machine — Fully automatic EVA/POE/Backsheet cutting, punching, laying and placement

Bus Bar Bussing Machine — Solder multiple cell strings together through bus bars

Laying Machine — Automatically place battery strings on glass for layout

Assembly Line Turning — 90-degree turn conveyor

Automatic Tape Machine — Automatically apply high-temperature transparent tape to secure cell strings to each other

Buffer — 18 layers buffer, modules are stored and keep the automatic line running normally

Laminator — Perform vacuuming, lamination, curing, and cooling processes on modules

Lightweight Module Trimming — Use an oscillating knife to automatically remove excess material around modules

Gluing Machine — Apply sealant to the junction box pasting the surface

Potting Machine — Fill the junction box with sealant

Conveying Line— Convey modules

Load Palletizing Machine — Put the modules on the assembly line on the moving curing line

Curing Line — Modules glue curing

Unload Palletizing Machine — Grab modules from the curing line to the assembly line

IV Tester — Test module power

EL — Check whether the modules have any defects such as cracks or others

Labeling — Apply module parameter label paper

Kit board — Support lightweight modules on the assembly line (used in the process before trimming)

Kit board with Convex Edges — Support lightweight modules on the assembly line (Used after trimming process)

Full Automatic Laminator

Equipment Name — Double-chamber Oil-Heated Solar Panel Laminator

Equipment Model — RO-QD2787

Effective Laminated Area — 8700×2700mm Chamber Layout Double Chamber

Overall Dimensions — 42700 × 3680m ×1800 mm

Mainframe Dimensions — 23200mm (L)×3680mm (W) × 1800mm(H)

Heating Model — Conduction Oil

Material Loading/unloading — Format Loading: Belt Conveyor, Unloading: Colling Roller

Control Platform — Independent Dual Touch Screen

Shipping Container — Flat Rack Container

Semi-automatic Laminator

Equipment Name — Semi-automatic Solar Panel Laminator

Equipment Model —Customized according to customer needs

Be suitable for — Smaller Solar Panels, Flexible Solar Modules, University Laboratory

Temperature Uniformity — ≤ ±2 ℃

Heating Model — Conduction Oil or Electricity Heating Tube

Hi-Speed Solar Cell Cutting - String Machine

Equipment Name — Hi-speed solar cell cutting and string machine

Speed — 7000 pcs per hour

Ribbon — Round ¢0.2mm

Busbar — 5 ~ 20BB

Cutting — Lossless scribing

Be suitable for — PERC, TOPCon, BC, and HJT solar cell

Inspection — EL inspection with AI function

Tabbing and String Machine

Equipment Name — Solar Cell Tabbing and String Machine

Speed — 1600 / 2600pcs per hour optional

Ribbon — Flat Thickness 0.25 ~ 1.6mm

Busbar — 3 ~ 20BB

Minimum Solar Cell — 36 x 36 mm

Be suitable for — PERC, TOPCon, BC, and HJT solar cell

Laser Cutting Machine

Equipment Name — Laser Cutting Machine

Speed — 1600 / per hour

Cutting Platform — 2 platform

Loading — Whole cell box, 100pcs

Laser Wavelength — 1064nm

Be suitable for — PERC, TOPCon, BC, and HJT solar cell

Laying up Robot

Equipment Name — Laying up machine

Speed — 8s / per stringer

Scope of the Size of Module — (L) 1630-2500mm * (W) 950-1400mm

Layout Precision — 6-axis robot and CCD high-precision vision

Rate Power — 10KW

EL Tester and Sun Simulator

Equipment Name — EL Tester

Testing Size — 2100 x 1200mm ~ 2400 x 1300 mm Customized

Pixel — 24 million

Save Testing Pictures — Automatic

Be used for — To check the solar panel of the secluded split, cracked cell, rosin joint, wire break, and other defects

Bus Bar Bussing Machine

Equipment Name — Bussing Machine

Be used for — Soldering bus bar

Cycle Time — ≤18S

Overall Yield — ≥99%, According to modules quantity

Breakage Rate — <0. According to cell quantity

Compatible Solar Cell Size (mm) — Compatible with 156-210mm

Maximum Compatible Module Size — 1650*900-2500*1500mm

Certification

Cooperative Cases

Exhibitions

Händler
Unternehmensdetails
Art der Werkstoffe Versiegelung, Bleiband, Ultra Klarglas, PET Rückseitenfolie, EVA, Steckverbinder, Rahmung, Zelle, Kupfer, Silikon-Anschlussdose
Kabelart Einadrig
Produkte

Solarzellen

  • RO-182Mono10BB
    Monokristallin
  • RO-5BB mono
    PERC
  • RO-166Mono9BB
    PERC
  • RO-210Mono12BB
    PERC

Solar Verkapselungsstoff

  • F406PS
    Standardhärtend

Rückseitenfolien

  • 1,67 / m2
    RO-PET
Weitere Büros
Land:
USA
Telefon:
+1 323 5809022
E-mail:
Adresse:
21716 25th Ave. SE, Unit A, Bothell, WA, 98021-5097
Bewertungen
REOO Company is a reputable provider of production line solutions that is worth to work with and would always recommend their products. Their company has rich experience in customized design, overseas installation, and timely after-sales service. They have customers all over the world and can meet the needs of different customers. All in all, it is a reliable partner.
-- Catherine chen, Techwise Solar Technology Co., Ltd.
Letzte Aktualisierung: 23.02.2024