LFP12.8-200

Junlee Energy Storage Technology Corporation
Preis:
Ab €142 / kWh
Ab €364 / Einheit
Typ von Speichersystem: LFP
Nennkapazität: 200 Ah
Region: China China
Ashely
Hinweis: Ihre Anfrage wird direkt an Junlee Energy Storage Technology Corporation gesendet.

Beschreibung:

12V 200Ah Lithium Iron Battery with Built-in one BMS control

*More than 4000 cycle times
* Battery Management Systems (BMS) with power terminal cut-off and recovery
* Cell balancing and low voltage/over voltage protection, short-circuit protection
* Comes with an 5 year limited warranty to give you peace of mind with your purchase.

Produkteigenschaft

Modelnummer
LFP12,8-200
Spezifikation  
Preis (kWh)
€143 / kWh
Preis (Einheit)
€365 / Einheit
Produktgarantie 5 Jahre
Speichersystem Kategorie Inselanlagen
Typ von Speichersystem LFP
Batterie Datenblatt
Elektrische Daten  
Nennspannung
12,8 V
Nennkapazität
200Ah@20hr
Max. Entladestrom
450 A
Max. Ladestrom
150 A
Innenwiderstände
150 mΩ
Zyklenfestigkeit 4000@100%DOD
Temperaturparameter  
Ladetemperatur -0 ~ +45 ℃
Entladetemperatur -20 ~ +60 ℃
Lagertemperatur -0 ~ +40 ℃
Allgemeine Daten  
Abmessung (L*B*H)
522x240x218 mm
Gewicht
19 Kg
Behältermaterial Akrylnitril-Butadien-Styrol
Abdeckmaterial Akrylnitril-Butadien-Styrol
PDF  
PDF Datei des Unternehmens Herunterladen

Specification

1.(Automotive Grade Lithium Battery)Junlee lithium iron batteries have exceptional quality since they are manufactured by Automotive Grade LiFePO4 cells with higher energy density, more stable performance & greater power. Hightest-level safety based on CE Testing Certificate for the cell inside the battery. With no acid in the battery, you're able to safety mount in any position. This makes li-iron batteries perfect for solar home, RV, Campers,Golf cart, motor homes, off-grid applications.

2.(10 Years lifetime)Junlee LiFePO4 battery provides 4000+ cycles, which is more than 10 times to lead acid with 200-500 cycles. Junlee LiFePO4 battery has a 10-year service life, three times longer than the lead acid's 3-year lifetime.

3.1/3 Lightweight Junlee LiFePO4 Battery weights only 1/3 the weight of lead-acid batteries, which makes it an easy choice for RVS,Marine and off-Grid applications when mounting or mobility is in the consideration.

4.95%*Efficiency Junlee LiFePO4 battery's flat discharge curve holds above 51.2V for up to 95% of its capacity usage, providing astronomical boosts in run-time compared to only 50% in lead acid. This product is your best choice for outdoor camping power and indoor easy installation.

5.100% Protection Junlee LiFePO4 battery has built-in BMS(Battery Management System) to protect it from overcharge,
over-discharge, over-current, and short circuit with excellent self-discharge rate. Built-in high-tem cut off preventes charging over 167℉(75℃). Without memory effect, no matter what state the battery is, it can be used as soon as it is charged. Junlee LiFePO4 battery is IP65 level waterproof, which set you free from worrying to install indoors or outdoors.


Lithium Solar Batteries Benefits

70% lighter than lead acid batteries
Two to four times the service life (3000-5000 cycles)
* Great for marine, RV, floor sweepers, lift gates, UPS systems, solar energy storage
* Battery Management Systems (BMS) with power terminal cut-off and recovery
* Cell balancing and low voltage/over voltage protection, short-circuit protection
* Maximize your energy potential with 100% Depth of Discharge (DOD)
* Run as many needed in parallel or series
* Comes with an 5 year limited warranty to give you peace of mind with your purchase.
* Can go up to 4 in series with this battery

Factory Introudction

JUNLEE Group owned three factories, work staff over 3000, is a leading global battery and new energy, solutions provider, specializes in the research,development, manufacturing and sales of the lead-acid batteries, lithium-phosphate batteries, and UPS industry solutions. Providing service for the solar energy storage system, UPS backup enerrgy solutions, all series of Photo-voltavic products and system design. JUNLEE Group's products cover more than 100 countries for application. We have more than 3000 employess and 100 R& D engineer.Junlee Energy is committed to innovative technology based on global customer needs with new energy,new power and a new world.To learn more about Li-ion batteries, please refer to https://www.junleepower.com/

Production Process

Lithium cells aging→Voltage and resistance pairing→Welding→BMS testing→BMS assemble→Semi-finished product testing→set case→Finished product shipment

Cell balancing: It is mainly to charge and discharge a single cell, test the capacity of the cell, and allocate cells with similar capacities together, so that the voltage consistency of the subsequent assembled batteries will be better, and the system will be more stable;

Voltage and resistance pairing: divide the capacity of the cells for voltage and internal resistance distribution, and only cells with the same voltage and internal resistance can form a group of batteries. If the subsequent charging and discharging are randomly assembled, the voltage of each cell of the battery may be inconsistent, so that the battery may be protected in advance during charging and discharging, which will affect the capacity of the battery pack;

Welding:The cells are welded in series and parallel to achieve the voltage and capacity required by customers. In the process of spot welding, it is necessary to ensure that the spot welding is firm, and the virtual welding of the spot welding will seriously affect the capacity and voltage consistency of the battery;

BMS testing: The main functions of the protection board include: overcharge protection, overcharge recovery, over-discharge protection, over-discharge recovery, over-discharge current protection, overcharge current protection, short circuit protection, and voltage equalization;

BMS install: After the BMS is tested, weld the cable or the bms battery pack in sequence, and the welding point is preferably centered, so that the collected voltage will be more accurate;

Semi-finished battery test: The main items of finished product test include: no-load voltage, load voltage, internal resistance, over-current protection, chargeability, short-circuit protection and other functions. After the test, we will analyze the load capacity of the battery, whether the battery can be protected when the current is too large or short-circuited, and whether the battery can be charged and discharged normally;

Semi-finished battery aging: battery aging is mainly to detect the capacity of the battery, and to detect whether the battery has a charge and discharge protection function. Through the detected battery capacity, it can be analyzed whether there is a virtual welding state and whether the protection board has advanced protection or no protection state. ;

Global Partners and Exhibition

CE certificates

Junlee Energy Storage Technology Corporation

Click to show company phone
https://www.junleepower.com
China
No.3 Building 1, Yanshan, Tangxia Town, Dongguan, Guangdong
Personalbestand: 100
Hinweis: Ihre Anfrage wird direkt an Junlee Energy Storage Technology Corporation gesendet.

Nützliche Kontakte

Contact Face
Ashely
Contact Face
Ken Yang
Contact Face
Ashlee
Contact Face
Sophy
Contact Face
Kathy Pung
Unternehmen Beschreibung
Die JUNLEE Group ist ein weltweit wachsendes Unternehmen für schnelle Energielösungen in der Entwicklung, Herstellung und dem Vertrieb von Batteriesystemen für neue Energiespeicher.

Wir verwenden nur die neueste Technologie, um die Stromversorgung Ihrer Produkte zu überwachen und zu steuern.

Für Junlee ist Forschung und Entwicklung genauso wichtig wie das Atmen. Wir investieren viel Mühe und Ressourcen, um sicherzustellen, dass die Produkte, die wir an unsere Kunden verkaufen, den Test der Zeit bestehen.

Schaffung nachhaltiger Energieprodukte, um Menschen mit einer langlebigen Energiespeicherung zu helfen.

Bei der Bereitstellung innovativer Produkte und Dienstleistungen integriert Junlee das Konzept des nachhaltigen Entwicklungsmanagements in alle Aspekte seiner Geschäftstätigkeit, etabliert ein Managementsystem für nachhaltige Entwicklung, hält sich an ethisches und Compliance-Management und stärkt und fördert kontinuierlich unsere Kunden und die Gesellschaft.

Unsere Mission ist Innovation, um Kundenleistungen zu ermöglichen und Ihr Leben zu stärken. Verfeinern, Ehrlichkeit, Streben und Innovation ist der Kernwert. Wir sind ein globaler Ansatz zur Elektrifizierung.

Kontaktieren Sie Junlee, um mehr über die vielfältigen Lösungen für jede Branche zu erfahren und wie wir Ihnen bei individuellen Anforderungen helfen können. Lassen Sie uns eine bessere Zukunft für saubere Energie aufbauen.
Produktvideos

Weitere Büros

Land:
China
Telefon:
13434236097
E-mail:
ashley@junleepower.com
Adresse:
1511, Block F, First International, No. 200 Hongfu Road, Nancheng District, Dongguan City

24 mehr Serien von Junlee Energy Storage Technology Corporation

  • €135 / kWh
    LFPR48-100
    100 Ah
    Standalone
  • €140 / kWh
    LFP51.2-100
    100 Ah
    Inselanlagen
  • €2,70 / kWh
    POWERWALL
    4800 - 9600 Ah
    Inselanlagen
  • €137 / kWh
    LFP12.8-100
    100 Ah
    Inselanlagen
  • €134 / kWh
    LFP12.8-300
    300 Ah
    Inselanlagen
  • €135 / kWh
    LFP12.8-250
    250 Ah
    Inselanlagen
  • €137 / kWh
    LFPW48-200
    200 Ah
    Inselanlagen
  • €137 / kWh
    LFPW48-150
    150 Ah
    Inselanlagen
  • €135 / kWh
    LFPW51.2-100Ah
    100 Ah
    Inselanlagen
  • €140 / kWh
    LFP48-100
    100 Ah
    Inselanlagen
  • €138 / kWh
    LFP48-200
    200 Ah
    Inselanlagen
  • €138 / kWh
    LFP51.2-200
    200 Ah
    Inselanlagen
  • LFP12.8-50
    50 Ah
    Inselanlagen
  • €137 / kWh
    LFP51.2-300
    300 Ah
    Inselanlagen
  • €137 / kWh
    LFP48-150
    150 Ah
    Inselanlagen
  • €137 / kWh
    LFPW48-140
    140 Ah
    Inselanlagen
  • €137 / kWh
    LFPW51.2-200
    200 Ah
    Inselanlagen
  • €137 / kWh
    LFPW51.2-150
    150 Ah
    Inselanlagen
  • €137 / kWh
    LFP25.6-160
    160 Ah
    Inselanlagen
  • €137 / kWh
    LFP 51.2V 160...
    160 Ah
    Inselanlagen
  • €128 / kWh
    LFP24V 100Ah
    100 Ah
    Standalone
  • LFP12.8V 7Ah
    7 Ah
    Standalone
  • LFP48V 50Ah
    50 Ah
    Inselanlagen
  • €136 / kWh
    LFPW48-100
    100 Ah
    Inselanlagen