Solarmodul-Verzeichnis
(12.358 Modulserien / 46.175 Module)

• Elegant Full Black Design

• Proven Half-Cut PERC Cells

• Advanced Multi-Wire Technology

• Up To 20,7% Peak Efficiency

• PID Resistant

• 25-Year Linear Power Output Warranty At 84,8%

• 12-Year Materials And Workmanship Warranty

- EVA encapsulated

- Glass foil sandwich laminated

- Sandblasted anodizing Aluminum frame

- IEC 5.400Pa tested

- Hail up to 25mm diameter, 80 Km/h tested

- Temperature Range: -40 to +85 ℃

- Nominal operating cell temperature (NOCT): 47℃

Power range from 555W to 575W

High conversion efficiency up to 21,68%

PERC technology

Anodized aluminium alloy frame3,2-millimeter high-transmission tempered front glassHighly resistant to PID

effects12-year product warranty, 25-year linear power output warranty

Equipped with 144 split cells in a single module - twice more compared to a conventional solar module

Each half-cut cell produces the same amount of voltage as a standard cell but only half of the current

Module reaches power of up to 455W with a maximum efficiency of 20,9%

Designed to withstand harsh environmental conditions - wind loads (2.400 Pa) and snow loads (5.400 Pa)

• HJT 2,0 Technology

• -0,26%/°C Pmax temperature coefficient

• SMBB design with Half-Cut Technology

• Up to 90% Bifaciality

• Sealing with PIB-based sealant

• Quality Management System and Product Certification

• PERC 182 Cells

• High Output Power

• Exceptional Low-Light Performance

• Robust Adaptability to Harsh Environments

• Tolerance Range of 0% to +3%

• Harness the power of TOPCon Technology for increased energy yield

• Achieve remarkable efficiency levels at 22,6%

• Benefit from extended service life with Half-cut technology

• Rigorously tested for PID resistance

• Cutting-edge Half-cut PERC Cells

• Maximum efficiency of 21,06%

• Exceptional Anti-PID Performance

• Easy to Install

• Junction Box Protected with IP68

• Higher Efficiency

• Module efficiency high of 22,3% ensures less BOS cost

• Gain more solar power per square meter

• N-type TOPContechnology ensures a 15-year product warranty and a 30-year

• Less Degradation · 1st-year degradation＜1% ·Annual degradation＜0,4%

• Lower Temperature Coefficient of PMAX

• Advanced half-cut cells

• Bifacial power gains up to 15%

• Micro gap architecture

• Multi-busbars

• Lower internal resistance

• High mechanical load: 5.400 Pa snow, 2.400 wind loads

• 15-year product 30-year linear power output warranty

• Tier 1 European BrandHigh Power Output

• 21,41% Peak Efficiency

• Certified By Independent Engineering Bodies

• Resistant To Severe Weather Conditions

• 25 Years Limited Product Warranty

• 30 Years Linear Power Output Warranty

• Outstanding Efficiency

• Reduced Heat Spot Risk

• Exceptional Low-Light Performance

• 0-3% Power Tolerance Range

• Highly Resistant to PID

• Withstands Harsh Weather Conditions

• 12-year product warranty and 25-year linear power warranty

• TUV certified

• Stable power output with positive+5% tolerance

• Can withstand snow loads of up to 5.400Pa and wind loads of up to 2.400 Pa

Hochwertige, hocheffiziente Solarzellen.

Die selbstreinigende Beschichtung senkt die Wartungskosten und erhöht die Stromerzeugungskapazität.

Sie haben einen ausgezeichneten Modulwirkungsgrad auch bei schwachen Lichtverhältnissen, wie z.B. morgens oder bei bewölktem Wetter.

Sie haben eine hervorragende Leistungsabgabe mit 25 Jahren Leistungsgarantie.

• The genuine manufacturing expert of TOPCon technology

• 4A1 high rating from Dun & Bradstreet

• The world famous third-party warranty, 12-year material warranty and 25-year power warranty

• Conversion efficiency can reach 21,29%

• Exceptional Efficiency: up to 22,00%

• Positive Power Tolerance: 0 to +5W

• Resisting wind loads of 2.400Pa and snow loads of 5.400Pa

• Internationally certified with QS ISO9.001

• Boasting an IP68 protection rating

• Resistant to Salt and Corrosion

• Anti-PID Technology

• 10BB multi-busbar technology for greater efficiency

• Half-cut cells for higher power output

• Less shading loss

• ISO 9.001, CE, TUV, and SGS certified

• High Module Efficiency Up To 22,65%

• Incorporates SMBB And Hot 2,0 Technologies For Enhanced Power And Reliability.

• Excellent Anti-PID And Anti-LID Performance

• Ideal For Both Residential And Commercial Installations.

• Backed By A 12-Year Product And 30-Year Linear Power Warranty.

The high module conversion efficiency of up to 21,28% by using innovative half-cell design and multi-busbar (MBB) cell technology

144 monocrystalline cells encased in a durable anodized aluminium frame

The module has passed the salt mist, ammonia and hail tests

The anodized aluminium frame allows the panel to withstand wind loads up to 2.400 Pa, and snow loads up to 5.400 Pa