CMLsolid (30 A)

Phocos AG
Technologie: PWM
Produktgarantie: --
Region : Deutschland Deutschland
Hinweis: Ihre Anfrage wird direkt an Phocos AG gesendet.

Beschreibung:

1. Battery state-of-charge indication via 3 LEDs
2. Load disconnect pre-warning via acoustic signal
3. Four-stage PWM charging algorithm with (integrated)
4. Automatic 12/24V detection
5. Large terminals: up to 16 mm2
6. SOC and voltage-controlled LVD
7. Full electronic protection
8. Aluminum housing (IP20)
9. Charger for external devices via USB port

Produkteigenschaft

Modelnummer
CMLsolid 30
Elektrische Daten  
Spannung @ Max. Solare Eingangsleistung
30 / 50 VDC
System (Batterie) Nennspannung
12 / 24 V
Maximaler Akku-Ladestrom
30 A
Maximaler Ausgangslaststrom
30 A
Eigenverbrauch
≤ 10 mA
Allgemeine Daten  
Abmessungen (H/B/T)
90x140x40 mm
Gewicht
0.42 Kg
Anschlussklemmen (Drahtstärke)
16.0 mm2
Ausgleichladespannung
14.8 / 29.6 V
Schnellladespannung
14.4 / 28.8 V
Schwebenladespannung
13.8 / 27.6 V
Akku-Typ GEL, AGM, VLA
Ladealgorithmus 4 Stage
Ladenstufen Erhaltungsladung, Ausgleichsladung
Temperaturkompensations-Koeffizient -25mV/°C@12V, -50mV/°C@24V
Schutzklasse IP 20
Temperaturbereich -40 ~ +50 °C
Max. Höhe 4000 m
Kommunikationsschnittstellen USB
Schutzeinrichtungen  
Schutzeinrichtungen PV Überspannungsschutz, Tiefentladungsschutz
PDF  
PDF Datei des Unternehmens Herunterladen

Product Feature


The CMLsolid charge controller is the next stage in the development of the CML series. The controller is equipped with a number of outstanding features such as an aluminum housing, USB port, battery status display, alarm, and electronic protection against reverse battery polarity and reverse panel polarity. 

The temperature-compensated, four-stage PWM charging algorithm (float-main-boostequalization) is adjustable for sealed and vented lead-acid batteries. The CMLsolid also allows either a SOC or voltagecontrolled low-voltage disconnect.

Battery status is clearly indicated via three LEDs, with an alarm for signaling a low-voltage disconnect.


About Phocos


Phocos’ passion is off-grid. Our mission is to deliver high-quality, off-grid power solar solutions that maximize system reliability and minimize total cost of ownership. 

With millions of products in service worldwide, we offer a wide variety of PV system components that have been used to bring light and electricity to some of the most remote places on earth.



Where is Phocos located?



Phocos AG

Magirus-Deutz-Straße 12, D-89077 Ulm
Eine Nachricht zu diesen Lieferanten senden
Phocos is a world leading manufacturer of solar-powered charge controllers and various components for off-grid power supplies. Our product spectrum is wide, ranging from charge controllers to lighting systems to DC appliances such as refrigerators and freezers. The products developed and produced by Phocos are eco-friendly, energy-saving and the perfect solution for off-grid solar energy systems.

15 mehr Serien von Phocos AG

  • CIS-MPPT-LED ...
    MPPT
  • MPPTsolid 230...
    MPPT
  • CM (4-10 A)
    PWM
  • ECO (10 A)
    PWM
  • CIS-N Series ...
    PWM
  • CIS-MPPT (10 ...
    MPPT
  • CIS-MPPT (20 ...
    MPPT
  • CIS-N-LED Ser...
    PWM
  • CML-MPPT (10 ...
    MPPT
  • CMLup (10-20 ...
    PWM
  • Dingo (20 A)
  • CXNsolid (50 ...
    PWM
  • ECO-N-T (10 -...
    PWM
  • SPS Series
    PWM
  • MPPT 100/40 (...
    MPPT